Agent Pocket 1.0

A handheld on-device AI assistant — a microphone, a speaker, and a color screen, in your pocket.

Agent Pocket 1.0 is a handheld AI assistant. It pairs a color screen with a microphone and a speaker, so you can talk to an AI that runs on the device itself — ask a question, hold a conversation, and hear it reply out loud.

It's the portable member of the Agent Series — the same microphone, speaker, and storage as Agent Station, in a flat handheld you can carry.

Agent Pocket 1.0 — a landscape color screen with a row of five keys up the right side.

Looking for the build spec?

The exact module set, dimensions, weight, and assembly are on the Agent Pocket datasheet.

What you can do with it

Talk to an on-device AI assistant — ask questions and hold a conversation
Speak to it through the microphone and hear it reply on the speaker
Carry your assistant in a pocket and use it anywhere

What's in it

Core: ESP32 1.0 — the host: 2.0-inch color touchscreen, Wi-Fi, Bluetooth
Expand: Media I/O 1.0 — the microphone and speaker for talking and listening, plus microSD storage
Power: Standard Cell 1.0 — the rechargeable battery
A Pocket Frame that holds the three modules together — they stack module-to-module, no cables

What it's for

Agent Pocket is for having an assistant with you — a desk, a pocket, a backpack. It's the one to pick when you want to talk to an on-device AI on the go. Want one that sits on a desk instead? That's Agent Station.

It's built for on-device AI: flash an AI firmware and the device listens, thinks, and replies on its own — the assistant runs on the Core, with the microphone and speaker on the Media I/O module. Mr.Z AI chatbot is one firmware you can run on it — see Firmware for the options.

Power it on

An Attaky has two power buttons — one on the battery and one on the host (Core). Switch the battery on first, then the Core.

Turn the battery on. The Power module has a power button on its edge — long-press it for about two seconds to switch the battery on.

Turn the Core on. The power button is on the Core's top edge — the third of its four top buttons (L1 · boot · power · R1). Long-press it for about two seconds to turn the device on; long-press again to turn it off.

The battery module — its power button sits on the edge, beside the USB-C port and the indicator LEDs

The Core — the four top buttons L1, boot, power, R1; power is the third from the left

These are close-ups of the modules — the power buttons are the same on every build.

Set it up

Flash an AI firmware — see Flash Your First Firmware and browse Firmware for the options.

Connect it to Wi-Fi if the firmware needs it for its AI features.

Speak to it through the microphone and listen to the reply on the speaker.

Good to know

It listens and talks. The Media I/O module brings the microphone and speaker, so the assistant can hear you and answer out loud — no headset needed.

Built as a stack. The three modules join module-to-module — the Core in front, the battery behind it, and the Media I/O module at the back — all held in one Pocket Frame. No linking cables. The datasheet has the full breakdown.

Keep it dry and cool. It isn't waterproof — keep it away from rain, splashes, and damp. Operating temperature is 0–40 °C (32–104 °F); keep it out of direct sunlight and prolonged heat, and do not leave it in a parked car.

Size — 68 × 48 × 30.5 mm, and it weighs 107.6 g.

Get one

Browse the Agent Series for all its builds, or Series for every Attaky build.