Agent Pocket 1.0

Agent Pocket 1.0 datasheet — module set, form factor, dimensions, firmware, and assembly.

Datasheet for Agent Pocket 1.0, the handheld Agent Series build. For the user guide, see the Agent Pocket manual.

What's in the build

Agent Pocket is a complete assembly — three modules and the Frame that holds them. The modules join module-to-module, so there are no linking cables. Each module has its own datasheet:

Part	Key specs	Datasheet
Core: ESP32 1.0	ESP32-S3 · 2.0-inch 240×320 touchscreen · Wi-Fi + BLE	View
Expand: Media I/O 1.0	microphone · speaker · microSD	View
Power: Standard Cell 1.0	1S Li-ion · 1000 mAh · MAX17048 fuel gauge	View
Pocket Frame	Holds the modules in the Pocket form	—

Specifications

Item	Value
Form factor	Pocket
Firmware	Flashed separately — on-device AI firmware such as Mr.Z AI chatbot
Dimensions	68 × 48 × 30.5 mm
Weight	107.6 g
Status	Launched

Agent Pocket is a three-layer module-to-module stack. The Core sits in front; the Power (battery) module mounts on the back of the Core; and the Media I/O Expand stacks on the back of the Power module, which passes the connection through. No cables are used — each module joins to the next directly through its rear board-to-board (BTB) connector. The whole stack is held in a Pocket Frame. See Frame & Connections for the connector standard, and the Compatibility Matrix for the combination rules.

Frame

The Pocket Frame is built from these structural parts. The codes are Attaky's internal part codes — the full part names are maintained by the hardware structural group.

Frame part (code)	Quantity
▮ ● ▶ ◆	4

Mechanical

Item	Value
Body	68 × 48 mm
Thickness	30.5 mm
Weight	107.6 g

Operating conditions

Item	Value
Operating temperature	0–40 °C (32–104 °F)
Water resistance	None — not waterproof, no IP rating

Keep it dry, out of direct sunlight, and away from prolonged heat — do not leave it in a parked car.