Cyber Deck Plus 1.0

Cyber Deck Plus 1.0 datasheet — module set, inputs, dimensions, weight, firmware model, and operating conditions.

Datasheet for Cyber Deck Plus 1.0, the Cyber Series build with both keyboard and gamepad input. For the user guide, see the Cyber Deck Plus page.

What's in the build

Cyber Deck Plus is a complete assembly — five modules, the Frame that holds them, and the cables that link them. Each module has its own datasheet:

Part	Key specs	Datasheet
Core: ESP32 1.0	ESP32-S3 · 2.0-inch 240×320 touchscreen · Wi-Fi + BLE	View
Expand: Media I/O 1.0	microSD card slot · I²S microphone · mono speaker amplifier	View
Control: Keyboard (Bottom) 1.0	48-key QWERTY · I²C	View
Control: Gamepad (Bottom) 1.0	D-pad · A / B / X / Y · shoulder buttons · I²C	View
Power: Standard Cell 1.0	1S Li-ion · 1000 mAh · fuel gauge	View
Cyber Deck Plus Frame	Holds the modules as one Complete Build	—
7-pin power cable	60 mm · reverse orientation · Core to Power	—
12-pin FPC cable	40 mm · same-side contacts · two-cable Control chain	—

Specifications

Item	Value
Form factor	Deck (keyboard + gamepad)
Firmware	Flashed separately — custom firmware or a compatible open-source port
Dimensions	68 × 122 × 20.5 mm (W × H × D)
Weight	165.1 g
Status	Launched

Input and media

Function	Hardware
Text and shortcut input	48-key QWERTY keyboard
Directional and action input	Gamepad with D-pad, A / B / X / Y, and shoulder buttons
Touch input	Capacitive touchscreen
Local storage	microSD card interface
Audio input	Digital microphone
Audio output	Mono speaker amplifier
Motion sensing	6-axis IMU on the Core
Ambient sensing	Ambient-light and proximity sensor on the Core

Cyber Deck Plus is not tied to one pre-loaded application. The AI Build Assistant supports a new-firmware path from idea through build and bring-up, plus a porting path for existing open-source firmware. A port is viable only when the required hardware is present and the upstream license allows the adaptation.

Assembly

Cyber Deck Plus is built in three front sections. The upper section is the Core with the Media I/O Expand on its back, the middle section is the Gamepad, and the lower section is the Keyboard with the Power (battery) module on its back. The Power module connects to the Core by a 60 mm 7-pin power cable. Two 40 mm 12-pin FPC cables form the Control chain between the Core, Gamepad, and Keyboard. The whole assembly is held in a Deck Frame. See Frame & Connections for the connector standard, and the Compatibility Matrix for the combination rules.

Frame

The Deck Frame is built from these structural parts. The codes are Attaky's internal part codes — the full part names are maintained by the hardware structural group.

Frame part (code)	Position	Quantity
▮ ● ▲ ◆	Top-left and top-right	2
▮ ◤ ◢ ▲	Left-middle	1
▮ ◤ ◢ ◀ ▶	Centre	1
▮ ◤ ◢ ◼	Right-middle	1
▮ ● ◤ ◆	Bottom-left and bottom-right	2

Mechanical

Item	Value
Body	68 × 122 mm (W × H)
Thickness	20.5 mm
Weight	165.1 g

Operating conditions

Item	Value
Operating temperature	0–40 °C (32–104 °F)
Relative humidity	30–80%, non-condensing
Atmospheric pressure	700–1060 hPa
Water resistance	None — not waterproof, no IP rating

Keep it dry, out of direct sunlight, and away from prolonged heat — do not leave it in a parked car.