Mesh Pocket Junior 1.0
Mesh Pocket Junior 1.0 datasheet — module set, form factor, dimensions, weight, firmware, and assembly.
Datasheet for Mesh Pocket Junior 1.0, the entry Mesh Series build. For the user guide, see the Mesh Pocket Junior manual.
What's in the build
Mesh Pocket Junior is a complete assembly — three modules and the Frame that holds them. The modules join module-to-module, so there are no linking cables. Each module has its own datasheet:
| Part | Key specs | Datasheet |
|---|---|---|
| Core: ESP32 1.0 | ESP32-S3 · 2.0-inch 240×320 touchscreen · Wi-Fi + BLE | View |
| Expand: LoRa / GPS 1.0 | SX1262 LoRa (915 MHz, NA) · GPS + BeiDou | View |
| Power: Standard Cell 1.0 | 1S Li-ion · 1000 mAh · MAX17048 fuel gauge | View |
| Pocket Frame | Holds the modules in the Pocket form | — |
Specifications
| Item | Value |
|---|---|
| Form factor | |
| Firmware | Flashed separately — mesh-communication firmware such as Meshtastic or MeshCore |
| Dimensions | 48 × 68 × 39.6 mm (229.5 mm with the antenna up) |
| Weight | 121.5 g |
| Status | Launched |
Assembly
Mesh Pocket Junior is a three-layer module-to-module stack. The Core sits in front; the Power (battery) module mounts on the back of the Core; and the LoRa / GPS Expand stacks on the back of the Power module, which passes the connection through. No cables are used — each module joins to the next directly through its rear board-to-board (BTB) connector. The whole stack is held in a Pocket Frame. See Frame & Connections for the connector standard, and the Compatibility Matrix for the combination rules.
Frame
The Pocket Frame is built from these structural parts. The codes are Attaky's internal part codes — the full part names are maintained by the hardware structural group.
| Frame part (code) | Quantity |
|---|---|
| ▮ ● ◢ ◤ | 1 |
| ▮ ● ◢ ◆ | 3 |
Mechanical
| Item | Value |
|---|---|
| Body | 48 × 68 mm |
| Thickness | 39.6 mm |
| Height with antenna up | 229.5 mm |
| Weight | 121.5 g |
Operating conditions
| Item | Value |
|---|---|
| Operating temperature | 0–40 °C (32–104 °F) |
| Water resistance | None — not waterproof, no IP rating |
Keep it dry, out of direct sunlight, and away from prolonged heat — do not leave it in a parked car.