Radio Station 1.0
Radio Station 1.0 datasheet — module set, form factor, dimensions, firmware, and assembly.
Datasheet for Radio Station 1.0, the desktop Radio Series build. For the user guide, see the Radio Station manual.
What's in the build
Radio Station is a complete assembly — three modules and the Frame that holds them. The modules join module-to-module, so there are no linking cables. Each module has its own datasheet:
| Part | Key specs | Datasheet |
|---|---|---|
| Core: ESP32 1.0 | ESP32-S3 · 2.0-inch 240×320 touchscreen · Wi-Fi + BLE | View |
| Expand: FM/AM Radio 1.0 | FM / AM tuner · speaker · telescoping antenna | View |
| Power: Standard Cell 1.0 | 1S Li-ion · 1000 mAh · MAX17048 fuel gauge | View |
| Station Frame | Desktop Frame with four removable screw-in legs; holds the modules in the Station form | — |
Specifications
| Item | Value |
|---|---|
| Form factor | Station (desktop upright on four legs) |
| Firmware | Flashed separately — radio firmware such as FM/AM Radio |
| Dimensions | Body 68 × 64 × 32.5 mm (no antenna); 238 mm with the antenna retracted; antenna extends to 752 mm |
| Weight | 142.5 g (with antenna); 115.3 g without |
| Status | Launched |
Assembly
Radio Station is a three-layer module-to-module stack. The Core sits in front; the Power (battery) module mounts on the back of the Core; and the FM/AM Radio Expand stacks on the back of the Power module, which passes the connection through. No cables are used — each module joins to the next directly through its rear board-to-board (BTB) connector. The whole stack is held in a Station Frame with four screw-in legs. See Frame & Connections for the connector standard, and the Compatibility Matrix for the combination rules.
Frame
The Station Frame is built from these structural parts. The codes are Attaky's internal part codes — the full part names are maintained by the hardware structural group.
| Frame part (code) | Quantity |
|---|---|
| ▮ ◤ ● ◆ | 2 |
| ▮ ◤ ◤ ◣ | 1 |
| ▮ ◤ ◤ ◢ | 1 |
It also includes four brown screw-in legs (removable): they thread into the base to stand the device upright, and unscrew so you can pack it flat.
Mechanical
| Item | Value |
|---|---|
| Body width | 68 mm |
| Body height (no antenna) | 64 mm |
| Thickness | 32.5 mm |
| Height, antenna retracted | 238 mm |
| Antenna, extended length | 752 mm |
| Weight, with antenna | 142.5 g |
| Weight, without antenna | 115.3 g |
Operating conditions
| Item | Value |
|---|---|
| Operating temperature | 0–40 °C (32–104 °F) |
| Water resistance | None — not waterproof, no IP rating |
Keep it dry, out of direct sunlight, and away from prolonged heat — do not leave it in a parked car.