Retro Pocket 1.0
Retro Pocket 1.0 datasheet — module set, form factor, dimensions, weight, firmware, and assembly.
Datasheet for Retro Pocket 1.0, the handheld Retro Series build. For the user guide, see the Retro Pocket manual.
What's in the build
Retro Pocket is a complete assembly — four modules, the Frame that holds them, and the cables that link them. Each module has its own datasheet:
| Part | Key specs | Datasheet |
|---|---|---|
| Core: ESP32 1.0 | ESP32-S3 · 2.0-inch 240×320 touchscreen · Wi-Fi + BLE | View |
| Expand: Media I/O 1.0 | microSD · speaker · microphone | View |
| Control: Gamepad (Bottom) 1.0 | D-pad · A / B / X / Y · shoulder buttons · I²C | View |
| Power: Standard Cell 1.0 | 1S Li-ion · 1000 mAh · MAX17048 fuel gauge | View |
| Pocket Frame | Holds the modules in the Pocket form | — |
| Power cable | 7-pin SH1.0 · links the Power module to the Core | — |
| FPC cable | 12-pin FPC cable · links the Gamepad to the Core | — |
Specifications
| Item | Value |
|---|---|
| Form factor | Pocket (handheld with a bottom gamepad) |
| Firmware | Flashed separately — retro-gaming firmware such as Retro-Go |
| Dimensions | 68 × 97 × 20.5 mm |
| Weight | 130.5 g |
| Status | Launched |
Assembly
Retro Pocket is built in two sections. The upper section is the Core with the Media I/O Expand on its back. The lower section is the Gamepad and the Power (battery) module. The Power module connects to the Core by a 7-pin power cable, and the Gamepad by a 12-pin FPC cable. The whole assembly is held in a Pocket Frame. See Frame & Connections for the connector standard, and the Compatibility Matrix for the combination rules.
Frame
The Pocket Frame is built from these structural parts. The codes are Attaky's internal part codes — the full part names are maintained by the hardware structural group.
| Frame part (code) | Quantity |
|---|---|
| ▮ ● ▲ ◆ | 2 |
| ▮ ● ▲ ▲ | 1 |
| ▮ ● ▲ ◼ | 1 |
| ▮ ● ▲ ◣ | 1 |
| ▮ ● ▲ ◢ | 1 |
| ▮ ● ▲ ▮ | 1 |
Mechanical
| Item | Value |
|---|---|
| Body | 68 × 97 mm |
| Thickness | 20.5 mm |
| Weight | 130.5 g |
Operating conditions
| Item | Value |
|---|---|
| Operating temperature | 0–40 °C (32–104 °F) |
| Water resistance | None — not waterproof, no IP rating |
Keep it dry, out of direct sunlight, and away from prolonged heat — do not leave it in a parked car.